ஐ.எஸ்.எஸ்.என்:

சூழலியல் மற்றும் நச்சுயியல் இதழ்

திறந்த அணுகல்

எங்கள் குழு ஒவ்வொரு ஆண்டும் அமெரிக்கா, ஐரோப்பா மற்றும் ஆசியா முழுவதும் 1000 அறிவியல் சங்கங்களின் ஆதரவுடன் 3000+ உலகளாவிய மாநாட்டுத் தொடர் நிகழ்வுகளை ஏற்பாடு செய்து 700+ திறந்த அணுகல் இதழ்களை வெளியிடுகிறது, இதில் 50000 க்கும் மேற்பட்ட தலைசிறந்த ஆளுமைகள், புகழ்பெற்ற விஞ்ஞானிகள் ஆசிரியர் குழு உறுப்பினர்களாக உள்ளனர்.

அதிக வாசகர்கள் மற்றும் மேற்கோள்களைப் பெறும் திறந்த அணுகல் இதழ்கள்

700 இதழ்கள் மற்றும் 15,000,000 வாசகர்கள் ஒவ்வொரு பத்திரிகையும் 25,000+ வாசகர்களைப் பெறுகிறது

குறியிடப்பட்டது
  • கூகுள் ஸ்காலர்
இந்தப் பக்கத்தைப் பகிரவும்

சுருக்கம்

New Active Substrates (ASs) Could Be Used to Stop Heavy Metals from Migrating to the Soil and Water Environments

Ruth Mary

An alternative to the well-known reactive permeable barriers (PRBs) is the objective of this paper. Using a reactive barrier below the ground known as PRB is one method for cleaning up contaminated groundwater. New polymer active substrates (ASs) were used to prevent hazardous heavy metals from entering the soil. On the skeleton material (fiberglass or textile), aliquat 336, bis(2-ethylhexyl)adipate, and polyvinyl chloride were utilized as the active substrates. Aliquat 336 bound the metal ions Cr(VI), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II). In contrast to the PRBs, the ASs were straightforward to obtain through pouring. The obtained ASs can be recycled and reused. The active substrates were bound to the study soil and a variety of metal ions from aqueous solutions. The active substrate was found to have reduced the concentrations of nickel, cadmium, lead, and chromium in the aqueous solution by more than 50% and more than 90%, respectively. Additionally, the use of revealed that the metals zinc and chromium had a high sorption efficiency of 81% and 66%, respectively, which restricted their movement from the soil to the water. In soil, the best combination of active substrate and plasticizer was the most efficient. This solution reduced copper, lead, and cadmium by more than 70% and by at least 50% for each tested metal ion.